Electrostatic Ion Thrusters

Electrostatic Ion urge onersAbstractThe ion drug traffickers give out to the galvanizingal actuation category and are utilize by modern spacecraft either to prolong their position relative to the undercoat or to complete deep space foreign bearings. Their chief(prenominal) characteristic is the towering specific impulse which involves an efficient use of the propellent, a mandatory requirement for space activities where weight is the main restriction. The thrust is generated by the acceleration of change gas at precise high velocities. The mechanism employ to achieve the acceleration distinguishes these propulsive devices in devil main categories still and electro magnetic. In the first eccentric, a emf passing accelerates the ions by means of the Coulombs force. In the second type the interaction of the ionised gas with a magnetic line of business of study generates the thrust through the Lorentzs force. This paper focuses on the analysis of the main featu res and architectures of the electrostatic ion thrusters. In the first part, the originators why they are used for space applications are explained. Afterwards, the propulsors physic and the working principles are illustrated with considerations on their advantages and borderations. Eventually, an overview of the domain of applications and future design innovations is presented.Keywords Ion thrusters, student residence thrusters, FeepNomenclatureEP galvanic PropulsionESAEuropean Space AgencyNASANational Aeronautics and Space AdministrationJAXAJapan Aerospace exploration AgencyGEOGeostationary Orbitking of beastslow Earth OrbitSTPStationary Plasma ThrusterElectrostatic ion thrusters are a major theatre of interest within the field of space applications. Thanks to the constant heightened of electrical power on hand(predicate) in modern spacecraft the last two decades withdraw seen a growing proliferation of this technology. The concept of electric propulsion has been theorize d for the first time by Robert H. Goddard in 19061 and Herman Oberth in 19292 but it was not until 1948 that the research efforts on ion thrusters instruction execution on a spacecraft began. A enormous contribution was given by the work of Ernst Stuhlinger1. proto(prenominal) experimental tests started during the 50s and leaded to the first successful space test in 1964 with the SERT-13. With the end of the Cold state of war and the Space Race the interest in these devices diminished but just for a short period. immediatelyly in fact ion thrusters are essential for a wide range of space tutelages. In this paper, later on a brief explanation of the importance of high impulse thrusters for space applications, the three main architectures of electrostatic ion thrusters are presented. For each category the paper will look into the working principles, evolution over the years, applications in space mission and future development of the technology.The essential campaign of the d evelopment of the ion thruster for space applications is the highly high efficiency in the utilization of propellant mass and the corresponding reduction of the launch costs, a critical parameter for the mission feasibility. Moreover this technology permits to performs deep-space missions other(a)wise inaccessible to conventional chemical rockets4. The reason lies in the Tsiolkovskys equation which can be derived from the New net tons law of momentum conservationWhere and are the final and the initial spacecraft mass singly, is the velocity substitute and is the exhaust velocity. The equations shows that must be comparable to to cod a significant fraction of final mass. Thrusters that provide a galactic propellant exhaust velocity compared to the mission will attain a propellant mass that is only a small fraction of the initial spacecraft wet mass. Space mission are patternified by the amount of velocity change needed for the orbital maneuvers, planetary mission for e xample requires velocity above 10 km/s4. flurry 1Characteristic velocity incrementsMission km/s1 year station tutelage10LEO GEO3.5Earth Mars (return)14Earth Venus (return)16Earth Jupiter (return)64Earth important Centaury (return)30000The exhaust velocity is directly proportional to the specific impulse, which can be seen as a notice of the propellant acceleration efficiency. The formulation iswhere in the mass flow and the sea-level gravitational acceleration. Typical value of different propulsive systems are listed in table 2. It can be seen that the necessary velocity augmentation is a great deal(prenominal) large than the typical chemical rocket exhaust velocity, for this reason they are not suitable for this kindly of missions. The latter is restricted by the intrinsic nothing of the propellant, thermal limitations of the materials and frozen flow losses4. For electric thrusters the propellant and the dexterity source are independent and the specific impulse dep ends only on the energy deposed into the plasma5. other key strength of ion thrusters is the high thrust efficiencywhere is the available electric power and is the thrust. The equation shows that be a large specific impulse leads to a very low thrust level which is a typical characteristic of ion engines. As a consequence this kind of thrusters requires a large amount of propulsion time, actually the opposite of what happens with chemical propulsion, characterised by high thrust levels over a short time. elude 2 Representative specific impulse and thrust levels of different propulsive systems 2Propulsive system sThrust NLiquid monopropellant two hundred 2500.01 100Liquid bipropellant300 4500.01 107Solid propellant200 3001 106Hybrid propellant250 3501 106Ion Thrusters2000 5000 residence hall Thrusters1500 2500Feep Thrusters50000.001Electrostatic ion engines overcomes the limitations on the attainable exhaust speeds of conventional chemical rockets by the acceleration of the propellant through an electrostatic field. They can be dissever into three main categories Gridded Ion Thrusters, third house Effect Thrusters and Field-Emission Electric Propulsion. In each of those the same main functions are performed propagation of the plasma, ions acceleration and ions neutralization.This configuration is the most fully real and canvas concept of electric propulsion 4. The standard design comprises a metal ionisation bed bedroom surrounded by magnets and three power systems at the exit position. Acc elettroni4.1 Ionisation and extractionPlasma is a ionised gas where approximately an equal number of confirmingly charged protons and negatively charged electrons coexists6. The generation of positive particles requires an energy equivalent to the first ionization energy of the propellant. This amount of energy has an impact on the utmost attainable efficiency of the thruster that according to5 can be written aswhere is the ionisation energy and is the ion mass. The equation displays that the higher the ion mass and exit velocity ( thence specific impulse) the higher the efficiency while decreases it. For this reason propellants with a low specific ionisation energy (alkali metals and noble gases) are preferred. The lower limit for the utilisation on these type of thrusters is 2000 s.Modern ion thrusters uses Xenon as a propellant since it has a large atomic weight and it easy to store because it is an inert gas, although Mercury and Caesium would be more(prenominal) performant propellants since their mass is much larger and the ionisation energy slightly greater, the higher toxicity prevents their use in experimental tests. propulsiveIonisation voltage eVAtomic mass AMUCaesium3.9132.9Mercury10.4200.6Xenon12.8131.3Krypton14.083.8Hydrogen15.42.0thither are two mechanisms to create the plasma the electron-bombardment and the relatively recent frequency excitation. In the first type electrons emitted from a thermionic or a h ollow cathode collide with the propellant gas and generates positive ions. The electrons slope to reach the anode but the forepart of an axial magnetic field generated by the magnets outside of the chamber causes a spiral path that improves their toil and the ionisation efficiency. When an electron ionises an atom its energy decreases and when it drop below a certain level the magnetic field is not able to confine it anymore and it is extracted by the anode.In the second type the ionisation chamber is surrounded by a coil that induces an axial electro-magnetic field that ionises the gas. This method has some advantages much(prenominal) as the elimination of the cathode which improve the thruster life and a larger range of mass flow variation 7.The number of ions created is equal to the number of electrons captured by the anode and an equilibrium determine is established. The plasma potential is slightly higher than the one of first storage-battery gridiron, as a consequence t he generated ions are attracted towards the exit of the chamber. In this region a sheet of the debaey length causes a natural curvature of the electric field and permits the extraction of the ions.Sheets debay4.2 AccelerationThe extraction of the ions from the ionisation chamber and the acceleration are performed by an electric field applied by three perforated grids. The first one acts as a cover version while the second and the third accelerate and decelerate the gas respectively. The design of the grids is crucial and is establish on a trade-off among performance, life and size. The grid holes diameter is defined by conflicting targets, it must be enough small to retain the unionised gas but maximised to provide an high grid transparency to extract the maximum feasible number of positive ions5.An high potential difference is applied among the first and the second grid which accelerates the ionswhere and are the ion charge and mass respectively and is the potential differen ce. The potential of the middling grid is negative in order to avoid the back-streaming of the electrons from the neutralizer cathode.The presence of positive particles only, during the acceleration, leads to an essential upper limit in the ion current density that can by provided and hence to the thrust density (N/m2) of this devices with ill consequences on their size7. The limit is dictate by the Child-Langmuir law8that involves a thrust per unit of area ofwhere A is the dun area of the jet, d is the distance between the grids and is the electric constant. The formula demonstrates that to cook compact device dour ions and an high voltage are needed while the gap between the grids must be very small and this constitutes a thermal, electrical and structural challenge. Adopting Xenon and the maximum electric potential difference with present technology level (typical value is gibibyte Volt) the value which is very low. The exhaust speed achieved in this case, and hence the specific impulse, is excessively high considering the actual space mission requirements. Since just lowering the potential difference would reduce the already small value of thrust density a third deceleration grid is added1. Placing the acceleration grid at a negative potential the problem of the excessive velocity is figure out without compromising the thrust density. The value of the required specific impulse determines the value of the third grid potential5.The one charge nature of the transplantise causes the repulsive force between the accelerated ions which tend to diverge from the axial direction. Since the repulsion force is proportional to the communicate diameter the latter is subdivided into small portions with order of order equals to the grids distance. Since the electric field generated by the first grid is convergent the grid can be designed in such a way that particles charge became axial due to the repulsive force inside the beam.The grid geometry and the ions escape have a crucial roles in determining the thruster life, for this reason they are made of healthy metals such as Molybdenum, Graphite composites have been recently introduced7. Even though the grid are accurately designed, a secondary current of low energy ions hits the accelerator grid causing erosion. This current is caused by the Charge-Exchange Ionisation some neutral atoms of propellant escaping from the ionisation chamber are struck by beam ions and a charge exchange happens5. The resultant low energy ions are accelerated towards the intermediate grid with enough energy to consume it over a long period. This process leads to a distortion of the grid holes that increases the damage until a structural failure of the grid occurs or the back streaming of electrons is not prevented anymore.4.3 neutralizationIf the positive charged ions beam exiting from the thruster is not neutralised the thruster acquires a negative potential and causes the ions back-streaming. The neu tralisation is achieved by the emission of a negative current by an hollow cathode positioned outside of the ions streams.Since the potential difference in this case is very low (electrons dont need to be accelerated) and the distance is an order of magnitude larger than the grid gap, the Childs law prevents the emission of a pure electrons current. The solution is the utilisation of a plasma bridge, a global neutral plasma with an electrons current inside. The hollow cathode is constituted by a resistance of refractory materials and an orifice plate at the downstream end9. Inside the tube an insert made of atomic number 74 is impregnated with a low work-function metal. The cathode is wrapped by an heater that allows electrons emission through thermionic effect when temperature reaches 1000C9. Xenon is fed into the tube and electrons emitted from the insert are extracted by a keeper electrode downstream of the orifice.4.4 growing of the technology and future developmentThe first ion engine flight was the demonstrative mission Space Electric Rocket Test (SERT 1) in 19643, followed in 1970 by the SERT 2 whose two mercury thrusters achieved 2000 and 3700 hours of subroutines respectively providing 300 restarts10.The first use of gridded ion thrusters adopted for station keeping for commercial applications has been the XIPS-13 in 1997 for the PAS-5 (PanAmSat-5) communications satellite5. The posterior generation of gridded ion engine, NSTAR, was create by NASA JPL and Boeing. This thruster equipped the Deep Space 1 in 199811, a demonstration spacecraft that reached an asteroid and a comet. It provided 16000 hours of operation during the mission and over 40,000 hours of life testing5. Hundreds of papers have been published on its design and performance.In 1999 an evolution of the XIPS-13, the XIPS-25, was first lunched on a Boeing 702 Satellite12. This second generation is capable of providing orbit raising other than station keeping and momentum control. To date these thruster have been used for station keeping on Boeing 702 class satellites for more than 10 years, and 68 are currently operating in orbit on 17 spacecraft5. The next model used for station keeping was lunched on the telecom satellite Artemis in 2001 by the ESA. It used two T5 and two RIT thruster developed by Astrium13. The satellite reached a GEO orbit convey to the ion thrusters used as a primary propulsion for recovery the chemical stage failure.In 2003 JAXA lunched the Hayabusa mission which equipped with four ion thrusters collected samples from an asteroid and returned to Earth in 201014. Later in 2007 the Dawn mission of NASA was lunched to study two protoplanets in the asteroids belts, Vesta and Ceres, it has been the first time that a spacecraft orbited around two different solar system bodies, it would have been impossible without ion engines15. In 2009 the soberness Field and Steady-State Ocean Circulation Explorer (GOCE) mission was lunched to study the va riations of Earth gravitational field16. The key component of the mission were two ion thrusters for drag compensation. A new challenging mission named Bepi-Colombo is planned for October 2018 by a coaction between ESA And JAXA17. The aim is the exploration of Mercury and will use four QinetiQ T6 ion thrusters. Another gridded ion thruster available in near future will be the NASA Evolutionary Xenon Thruster (NEXT)17, Glenn Research fondness manufactured the test engines core ionization chamber, and Aerojet Rocketdyne designed and built the ion acceleration assembly18. A long length test(LDT) was initiated in 2005 and was voluntarily terminated in 2014 after more than 50000 hours of operation and almost 1 ton of Xenon consumed. Post-test inspection highlighted the readiness of the thruster for space use1920. It has been proposed for several future missions21. The first two flight units will be available in early 2019.NamePower Kw sT mNSERT 11.4490028XIPS 130.33257018NSTAR0.5-2.33 10020-95XIPS 254.53800165RIT4.33-5000150T50.27-0.653-350010-25T65.2350040-200NEXT0.5-74200237The Hall thrusters are direct competitors of the gridded ion thrusters, even if they have a lower efficiency and specific impulse the thrust density is many measure greater since both ions end electrons are accelerated and the Childs law is not a limit. The system is based on a fundamental effect discovered in 1879 by Edwin H. Hall22, he showed that in presence of a perpendicular electric and magnetic field an electric current flows perpendicular to both. This phenomenon is exploited for the ionisation and the acceleration of the propellant.5.1 Working PrinciplesThe ionisation chamber is axisymmetric, enclosed in two concentric cylinders. A radial tire magnetic field is applied through permanent magnets or solenoids, at the appropriate of the chamber is fit(p) a metallic anode from which the propellant is injected. At the cylinder end an hollow cathode emits an electrons beam that is div ided into two parts. About 60-80% of the electrons are used to neutralise the positive ions ejected from the chamber, the remaining are trapped by the magnetic and the electric fields at the chamber exit and constitute a virtual plasma cathode7. The direct flows of the electrons towards the anode is prevented by the Hall effect which causes a spiral trajectory of the electrons.The propellant unleashed at the chamber entrance moves towards the electrons region and is ionised. Then the resultant electric field accelerates the ions. The long residence time of the electrons in the annular chamber, due to the magnetic confinement, makes the ionisation very efficient. Even if the magnetic field is determinant for the thruster operation the acceleration is achieved by a stationary electric force. The magnetic field that confines the electrons, which peaks at the exit, affects the ions trajectory causing a disturbance tangential torque that must be compensated and an high beam divergence a ngle of about 40 that reduces the thrust efficiency and may cause electrostatic charging and birth control device to the satellite communications.The ionisation is much more efficient than in the gridded ion thrusters thanks to the lower ionisation energy requested and permits to achieve satisfactory efficiency 50-60% even with a relative low specific impulse. The considerable complexity of the plasma dynamic due to the presence if the magnetic and the electric field within the thruster causes fluctuations in the electron density that could cause severe damages, for this reason the electric potential is limited to 350 Volts.5.2 SPT and TAL variantsOn the basis of the different materials that constitutes the cylinder wall in contact with the plasma Hall thrusters are divided into Stationary Plasma Thrusters (SPT), that are characterised by insulating walls made of boron nitride and silica compound (BN-SiO2), and Thruster Anode class (TAL) which have a conductive one23. Since the w alls are continuously hit by some electrons and consecutively emits other electrons because of the secondary electron emission (SEE) effect, if the wall are metallic the resultant quantity of electrons is larger, the electric field is more intense and the potential drop occurs in a shorter distance. The result is more compact architecture with higher thrust density. The power loss are also related to life are strongly influenced by wall interactions. For SPT thrusters a significant amount of their power is unconnected on the dielectric channel walls due to electron bombardment. The metallic walls in TAL thrusters gather a smaller electron current since they have the same potential of the cathode which rejects the electrons and they have a small exposed area to the plasma, which limits the amount of ion and power lost to these surfaces. On the other hand the shorter chamber raises the intensity of the discharge current on the anode because the magnetic confinement is less effective 7.5.3 Evolution of the technology and future developmentThe first Hall-Effect thruster to operate in space was the SPT-50 aboard the Soviet Meteor spacecraft in 1971 and was mainly used for satellite stabilization. kickoff from that year more then 140 Hall thruster have been used in space24. later Hall engine of different power and size were developed with the introduction of the SPT-70 and SPT-100 in 1982. With their introduction in the west after the fall of the Berlin Wall in 1989 lot of research have been carried out by United States, France, Italy and Japan. The first US mission that adopted this technology was the demonstrator STEX spacecraft using D-55 TAL Hall Thrusters manufactured in Russia25. In 2004 the ESAs satellite SMART-1 adopted the Snecma PPS-1350-G, with a design similar to the SPT-100, to reach the lunar orbit from GTO26. The mission finished in 2006 with a controlled collision on the Moons surface. The probe covered more than 100 million kilometres, consuming just 82 kg of propellant.The joint venture between the Busek partnership and Aerojet Rocketdyne leads to the development of the BTP-4000 designed for US military spacecraft as well as commercial satellites. In 2000 an agreement between Aerojet and Lockheed Martin Space placement Company (LMSSC) developed the Hall Thruster Propulsion System (HTPS) for the next generation LMSSC geosynchronous spacecraft, this program adopted the BPT-4000 because of the ability to operate in a large range of powers and thrust modes allowing both station keeping and orbit raise18. Flight test qualifications and improvements lead to the find of the magnetic shielding phenomenon27. The achievement of a particular magnetic topology that essentially blocked the chamber wall erosion after 6000 hours, the developed erosion model enabled the possibility to predict andextent the engine lifetime. This thruster, used on the Advanced Extremely High Frequency (AEHF) communications satellites constitutes the cur rently most powerful Hall engine in operation.In 2009 AR and Lockheed Martin developed the XR-12, the first Hall thruster in the 10kW class, it was think for the US tenor Forces TSAT constellation but after the cancellation of the program its use for future missions have been studied by NASA. In the recent years high power and thrust Hall engine have been canvassd thanks to the increasing of the available spacecraft power. The consequent increase of thrust reduces the amount of time for the mission and permits a larger payload.In Europe Snecma developed the PPS-20k for the HiPER Project, an European project to study innovative electric propulsion technologies for future space transportation and exploration.In 2010 NASA promoted the Human Exploration Framework Team (HEFT) to investigate new technologies for a future human space exploration and high power Hall thrusters, thanks to the high power processing capabilities and extensive range of thrust levels, were chosen as a possible technology. The NASA-457Mv2 50-kW class, whose development started in 2004, has been well-tried during 2011 with satisfactory results. This model can be a potential imply of start for future NASA exploration missions.Another step forward has been made with the development of the X3, a 100-kW class three-channel nested Hall thruster, designed by the Plasmadynamics and Electric Propulsion Laboratory (PEPL) at the University of Michigan, in collaboration with NASA and the Air Force Office of Scientific Research. Its performances up to 30 kW have been recently successfully tested and further measurements in order to analyse the complete operating envelopment up to 200 kW will be effectuated in the near future.NamePower Kw